Industrial Measurement Articles

18 articles listed in reverse chronological order. View articles by field type using links on the right.


Photogrammetry Accelerates Creation of Marine Enclosures
08/14/2017 | Jerry Fireman
Marine Link
Applications: All and Industrial Measurement

Photogrammetry helps reduce time to create marine enclosures and covers from 3 days to 4 hours.

Costa Marine Canvas specializes in producing high end, custom marine furniture, soft goods, enclosures and covers. One of the most difficult of those tasks is creating windscreen enclosures for large and complex fly-bridge structures. A typical flybridge enclosure might have five 5-foot tall panels, ranging in various lengths, and combined to be 20 feet or more. While basic in appearance, each panel consists of 20 or more complex pieces of various materials fastened together by adhesives and sewing to fit and fasten to the bridge structure.

 article link  local copy

 



Full-scale flying shape measurement of offwind sails with photogrammetry
11/05/2015 | Julien Deparday, Patrick Bot, Frederic Hauville, Benoit Augier - Naval Academy Research Institute - BREST, France; Marc Rabaud - Laboratoire FAST, Univ. Paris-Sud, France
submitted to Ocean Engineering
Applications: All, Engineering & Science, and Industrial Measurement

“At full-scale, measuring the spinnaker shape in real sailing conditions (flying shape) is also valuable for sail designers as they would benefit a feedback for their designs. Nonetheless it remains complex to measure spinnaker flying shapes partly because of their inherent instability, like flapping of the luff. This work presents a full-scale experimental investigation of spinnaker flying shapes with simultaneous measurement of the aerodynamic loads on the three sail corners, as well as navigation and wind data. The developed experimental set-up and photogrammetric method to acquire the flying shape of the spinnaker are presented”

  local copy

 



The Use of the Terrestrial Photogrammetry in Reverse Engineering Applications
04/01/2015 | Naci Yastikli, Zehra Erisir, Pelin Altintas, and Tugba Cak - Yıldız Technical University, Istanbul, Turkey
International Journal of 3-D Information Modeling
Applications: All, Engineering & Science, and Industrial Measurement

“The reverse engineering applications has gained great momentum in industrial production with developments in the fields of computer vision and computer-aided design. The reproduction of an existing product or a spare part, reproduction of an existing surface, elimination of the defect or improvement of the available product are the goals of industrial reverse engineering applications. The first and the most important step in reverse engineering applications is the generation of the three dimensional (3D) metric model of an existing product in computer environment. The possible usage of terrestrial photogrammetry in reverse engineering application is investigated based on low cost photogrammetric system. The main aim was the generation of the dense point cloud and 3D line drawing of the ship model by using terrestrial photogrammetry. Then 3D line drawing operations, point cloud and orthoimage generations have been accomplished by using PhotoModeler software. As a result of the proposed terrestrial photogrammetric steps, 0.5 mm spaced dense point cloud and orthoimage have been generated.”

 article link 

 



Noncontact Modeling of Structures Using Close- Range Digital Photogrammetry
11/01/2012 | Kenneth R. Leitch, Malcolm B. Coon - West Texas A&M University
PRACTICE PERIODICAL ON STRUCTURAL DESIGN AND CONSTRUCTION
Applications: All and Industrial Measurement

“Recent years have seen a vast change in measurement technology. Data that were once extremely difficult and possibly dangerous to collect can now be collected and processed using only a digital camera and off-the-shelf software. Currently, digital close-range photogrammetry has made it possible to efficiently model a variety of structures in a budget-friendly manner. In this paper, a range of different types of structures were modeled. The viability of using this type of measurement is studied for different structure types, and the feasibility of using this method in conjunction with or as a replacement of other means is discussed”

  local copy

 



Automated Low-cost Photogrammetry for Flexible Structure Monitoring
09/01/2012 | Chih-Heng Wang, Jon P. Mills, Pauline E. Miller
Applications: All and Industrial Measurement

Long-term campaigns and flexible structures are regarded as two of the most challenging subjects in monitoring engineering structures. Long-term monitoring in civil engineering is generally considered to be labour intensive and financially expensive and it can take significant effort to arrange the necessary human resources, transportation and equipment maintenance. When dealing with flexible structure monitoring, it is of paramount importance that any monitoring equipment used is able to carry out rapid sampling. Low cost, automated, photogrammetric techniques therefore have the potential to become routinely viable for monitoring non-rigid structures.

 article link  local copy

 



MONITORING THE TESTING, CONSTRUCTION AND AS-BUILT CONDITION OF MEMBRANE STRUCTURES BY CLOSE RANGE PHOTOGRAMMETRY
06/21/2010 | Chih-Heng Wang, Jon P. Mills, Peter D. Gosling, Ben Bridgens, Robert J Grisdale; School of Civil Engineering and Geosciences, Newcastle University
International Archives of Photogrammetry, Remote Sensing and Spatial Information Sciences, Vol. XXXVIII, Part 5
Applications: Accuracy, All, Engineering & Science, and Industrial Measurement

Engineering deformation monitoring requires techniques which can produce high precision and accuracy, reliable measurements at good temporal resolution and fast processing speed. Moreover, monitoring in civil engineering is generally considered to be labour-intensive and financially expensive, and it can take significant effort to arrange the necessary human resources, transportation and equipment maintenance. Such requirements are especially true for monitoring non-rigid membrane structures (defined in this paper as covers or enclosures in which a fabric surface is pre-shaped and pre-tensioned to provide a shape that is stable under environmental loads). Low cost, automated, photogrammetric techniques therefore have the potential to become routinely viable for the structural monitoring of non-rigid membrane structures in the future. This research is investigating the use of close range photogrammetry to be applied at all stages of membrane structure engineering, from materials testing, through dimensional control in construction to in-situ, as-built monitoring of the finished construct.

 article link  local copy

 



Photogrammetric Measurement of Recession Rates of Low Temperature Ablators in Supersonic Flow
01/04/2010 | David Callaway, Mark Reeder, Robert Greendyke : U.S. Air Force Institute of Technology; Ryan Gosse, U.S. Air Force Research Laboratory
48th AIAA Aerospace Sciences Meeting Proceedings
Applications: All, Engineering & Science, and Industrial Measurement

Ablative heat shields have been used to protect hypersonic vehicles during atmospheric re-entry during the Apollo missions and could be used for future flight vehicles as well. However, it is exceptionally difficult to perform reliable tests at conditions which are representative of flight to validate the models. In this study, the AFIT Mach 3 pressure-vacuum wind tunnel was used in combination with models consisting of dry ice. Measurement was obtained with projected laser dots, high-speed multi-camera photography and PhotoModeler PMV (pre-cursor to PhotoModeler Motion).

 article link  local copy

 



Metric Potential of a 3D Measurement System Based on Digital Compact Cameras
06/03/2009 | Enoc Sanz-Ablanedo, José Ramón Rodríguez-Pérez, Pedro Arias-Sánchez and Julia Armesto; Geomatics Engineering Research Group, University of León, and Department of Natural Resources and Environmental Engineering, University of Vigo
Applications: Accuracy, All, and Industrial Measurement

What is unique in this study is that accuracy was assessed on a system with four independent cameras and all those cameras were consumer-grade cameras with zoom lenses. This is a configuration one might use for a low-cost PMV system (for tracking object movement and shape change over time).

  local copy

 



Photogrammetric Investigation of the Flying Shape of Spinnakers in a Twisted Flow Wind Tunnel
03/01/2009 | Kai Graf, University of Applied Sciences Kiel (UAS), Germany, and Olaf Müller, LM Glasfiber A/S, Dept. R&D Aerodynamics Team, Denmark
The 19th Chesapeake Sailing Yacht Symposium Annapolis, Maryland
Applications: All and Industrial Measurement

This paper describes a method for the acquisition of the flying shape of spinnakers in a twisted flow wind tunnel. The method is based on photogrammetry. Results are shown comparing design versus flying shape of the spinnaker and the impact of wind velocity and wind twist on the flying shape.

  local copy

 



Animation of Experimentally Derived Structural Resonances
01/15/2009 | Shawn Richardson and Mark Richardson, Vibrant Technology, Inc., Scotts Valley, CA
Applications: All, Engineering & Science, and Industrial Measurement

The vibration response of a model airplane is animated as the result of real-world experimental study of modes. The structural data is captured in 3D by PhotoModeler.

  local copy

 


1 2 Next › Last »

©Copyright 2018 PhotoModeler Technologies